Add Favorite Set Homepage
Position:Home >> News

Products Category

Products Tags

Fmuser Sites

Omnia MPXNODE-DECODER

Date:2020/2/7 15:09:27 Hits:



FM Multiplex over IP, Decoder 2001-00522-000BSW PART: MPXNODE-DECODER

The Telos Alliance? revolutionized the modern broadcast facility with the invention of Audio over IP. We proudly extend the AoIP revolution we began in the studio out to the transmitter with the Omnia MPX Node. Like its namesake—the classic Axia? xNode?—Omnia MPX Node is a building-block technology that helps stations leverage the growing power and capability of data networking. The Omnia MPX Node is the first purpose-built hardware codec capable of sending or receiving full FM signals at data rates as low as 320 kbps utilizing the Omnia μMPX? algorithm, ideal for networks with limited capacity (including IP radios). MPX Node makes peak-controlled L/R baseband, stereo pilot, and RDS data routable from a studio to one or many FM transmitters. By transporting an FM composite signal rather than left/right audio, broadcasters can keep their on-air processing and RDS encoding at the studio, then deliver a transmission-ready, peak controlled FM multiplex signal directly to an FM transmitter without the need for transmitter-side peak limiting or stereo generation. The MPX Node is available as either an encoder or decoder, and a pair of units creates an end-to-end system.


Main Features:


* MPX Node is available as either an Encoder or Decoder
* Omnia μMPX algorithm can transport FM composite (MPX) and RDS/RBDS at 320 kbps—perfect for IP radios and DSL IP circuits and other lower bandwidth connections
* Encoder can be fed by any brand of FM audio processor
* Omnia.9 or OmniaSST* processing software can serve as the Encoder front end
* MPX Node Decoder outputs a standard analog MPX signal to feed any FM transmitter
* Full FM signals (including RDS/RBDS) can be sent over IP networks
* 5 In x 5 Out GPIO
* A single Encoder can transmit the same signal to multiple decoders
* Simple HTML.5-based web GUI allows you to control MPX Node from your desktop, tablet, or smartphone
* Cool-running, fanless operation
* Separate Ethernet ports for MoIP transport and web admin
* Dual bank firmware update design, for secure upgrading
* Half RU, xNode form factor
* Integrated test signal generator
* FM tilt correction


Specifications:


* Analog composite FM in/out on (BNC connector)
* Composite connector impedance 5 or 75 ohm (switch selectable)
* 10/100 Ethernet for web control and administration
* 10/100/1000 Ethernet for MoIP connections
* 5 in x 5 out GPIO on a DB15 connector
* 100-240 VAC input 50-60 Hz external power supply with 12VDC, 3.4A output on locking connector
* 8.5” (22 cm) wide; two may be mounted side-by-side in a standard 1RU rack space with accessory mounting kit; 1.72” (4.4 cm) height, 11.75” (30 cm) depth
* Operating temp range 0 to +40 degrees C, <90% humidity
* Shipping weight 7 lbs. (3.2 kg.)

Leave a message 

Name *
Email *
Phone
Address
Code See the verification code? Click refresh!
Message
 

Message List

Comments Loading...
Home| About Us| Products| News| Download| Support| Feedback| Contact Us| Service

Contact: Zoey Zhang    Web: www.fmuser.net

Whatsapp/Wechat: +86 183 1924 4009

Skype: tomleequan     Email: [email protected] 

Facebook: FMUSERBROADCAST     Youtube: FMUSER ZOEY

Address in English: Room305, HuiLanGe, No.273 HuangPu Road West, TianHe District., GuangZhou, China, 510620    Address in Chinese: 广州市天河区黄埔大道西273号惠兰阁305(3E)