Desktop Digital HybridBSW PART: HOST

JK Audio Broadcast HostJK Audio Broadcast HostJK Audio Broadcast HostJK Audio Broadcast Host

JK Audio's Broadcast Host digital hybrid turns your desktop into a professional broadcast center. It contains everything you need to get talk show-quality phone audio into your mixer or sound card for recording or broadcast.

Connect a mic and headphones for a simple broadcast back to the station. Already at the station? Use Broadcast Host in your newsroom to record high-quality interview audio. The Broadcast Host allows you to send mic and line level signals into the phone line while maintaining excellent separation between your voice and the caller's. The stereo output jack on the back of the unit provides your voice on one channel and only the caller's voice on the other. The balanced XLR output jack contains only the caller's voice.
This digital hybrid connects audio signals to a standard analog telephone line without the transmit/receive crosstalk common to analog hybrids. The Digital Signal Processor (DSP) continuously monitors both the phone line and audio signals to deliver excellent separation. This proprietary, dual-convergence echo canceller algorithm can achieve excellent separation, typically exceeding 50 dB, without any setup and without sending a noise burst down the line.

Broadcast Host provides connections for a microphone, headphones, mixer, sound card, telephone and your analog telephone line. An auxiliary telephone is only required to place outgoing calls. The auxiliary telephone is disconnected when you press the "Call" button, and reconnected when you press the "Drop" button.

Broadcast Host features Auto-Answer/Auto Disconnect for use in IFB and monitoring applications. Other applications include: telephone interviews, talk shows, church PA interface, and conference room full duplex applications.

Main Features:

*Excellent separation of caller and talent voice
*16 bit DSP technology
*Proprietary auto null algorithm
*50 dB null
*XLR input (mic / line switch)
*3.5 mm mono line input
*XLR caller output
*3.5 mm stereo line output
*Send & Receive LEDs
*Send & receive volume controls
*Headphone jack, 3.5 mm stereo, both sides mixed send and receive
*Headphone Volume control
*Guest Module remote control jack
*Auto answer / disconnect

For instructions on how to hook up your telephone hybrid to a mixer for recording phone interviews, click on this How-To pdf.

Prev:DAW Tip: Filter out MIDI “Ghost Notes”

Next:Dave Smith Instruments Updates Prophet 6

Leave a message

Message List

Comments Loading...

Products Category

Products Tags

Fmuser Sites

JK Audio Broadcast Host

Leave a message

Message List