FUTV-9451 indoor (100Watt) UHF MUDS Broadband HD SD MPEG2 4 H.264 DVB-T DVB-C DTMB TV broadcast Transmitter MFN 10w amplifier R: V20151130-11-33 Data sheet Input:Tuner Output:DVB-C Outline FUTV-9451 is a professional DVB-T digital transmitter researched and developed by FMUSER, which gives sustained power output. Its compact structure design has greatly saved space for your room. It is applicable to both SFN and MFN network modes and supports both signal-carrier mode and multi carrier-mode. Signal channel and broadband transmission are supported. The frequency range of FUTV-9451 is from 470MHz～806MHz. This transmitter has a very high linear and high reliability as it takes high gain

Detail

Previous:FUTV-9451 Outdoor (100Watt) UHF MUDS Broadband DVB-T DTMB Digital HD SD mpeg2 TV Transmitter Television Numerique Terrestre TNT gap filler amplifier

Next:FMUSER FUTV-9422 (500Watt) UHF MUDS Broadband HD SD MPEG2 4 H.264 DVB-T TV broadcast Transmitter SFN ISDVB-T solid amplifier

FMUSER has upgraded panel design of all CZE series to FU series, stay tuned for further updates!

Price(USD)	Qty(PCS)	Shipping(USD)	Total(USD)	Shipping Method	Payment
8500	1	0	8500	DHL
				DHL

FUTV-9451 indoor (100Watt) UHF MUDS Broadband HD SD MPEG2 4 H.264 DVB-T DVB-C DTMB TV broadcast Transmitter MFN 10w amplifier

R: V20151130-11-33
Data sheet

Input:Tuner
Output:DVB-C

Outline

FUTV-9451 is a professional DVB-T digital transmitter researched and developed by FMUSER, which gives sustained power output. Its compact structure design has greatly saved space for your room. It is applicable to both SFN and MFN network modes and supports both signal-carrier mode and multi carrier-mode. Signal channel and broadband transmission are supported.

The frequency range of FUTV-9451 is from 470MHz～806MHz. This transmitter has a very high linear and high reliability as it takes high gain and high linear LDMOS tube amplifier module. Furthermore, it supports AGC function to keep sustained power output.

FUTV-9451 DVB-T digital transmitter can be widely used in HD/SD digital TV signal transmitting and broadcasting system.

Key Features

·Enhanced signal transmission quality
·Intelligent and modularized amplifier unit, takes high power gain and high linear LDMOS tube amplifier module design
·Low power consumption and super linear design to improve the transmission power, and reduce the nonlinear distortion
·Support AGC function with sustained power output to allow the transmitter a good stability and reliability
·LED on the front panel support alarm and signal monitor
·Stabilized-power supply with wide range of voltage and high efficiency
·Multi lightning protection measures, good protection for whole equipment.
·24-hour working unmanned, user friendly design
·Support fault self-diagnosis
·Support MFN and SFN system
·Easy to install, elegant appearance

Monitoring Objects and Alarm Status

Monitoring Objects	Alarm Status
Power Supply	abnormal
Overheating	alert
Amplifier	abnormal
Antenna feed system	abnormal

Technical Specifications

Phase noise

Center frequency deviation (Hz)	Local oscillator (dBc/Hz)
at10	≤ - 70
at100	≤ - 85
at1k	≤ - 95
at10 k	≤ - 100
at100 k	≤ - 111
at1 M	≤ - 125

Electrical Parameters

Item		Technical specs
Basic Parameters	TV Standard	DTMB-T /DVB-T/DVB-C
	Modulating mode	4/16/32/64 QAM
	Frequency stability (3 months)	External Frequency Range: ≤10-10
	Frequency stability (3 months)	Internal Frequency Range: ≤10-7
	Frequency accuracy	MFN: ±100Hz / SFN: ±1Hz
	Local oscillator phase noise	See table above
	In-band stray	≤-60dBc
	In-band ripple （fc±3.591MHz）	±0.5dB
	Out-of-band rejection	≤-65dBc
Input	Frequency range	470MHz~806MHz (any 100MHz bandwidth)
	level	-20±3dBm
	Input reflection loss	≥15dB
	connector	N-K
Output	Output power	100W
	Frequency range	470MHz~806MHz (any 100MHz bandwidth)
	Output impedance	50 Ohm
	In-band ripple （fc±3.591MHz）	±0.5dB
	Shoulder level	≥40dBatcentral frequency FC±4.2MHz (after correction, single channel)
	MER	≥35dB (after correction, single channel)
	output reflection loss	≥26dB
	Output power variation	±0.25dB
	Inner adjacent channel transmission power	Inner adjacent channel transmission power : in-band transmission power≤-60dB， meet that Inner adjacent channel transmission power≤13mW
	External adjacent channel transmission power	External adjacent channel transmission power : in-band transmission power≤-65dB， meet that Inner adjacent channel transmission power≤13mW
Environment condition	Working temperature	-20~+50C
	Storage temperature	-30~+75C
	Relatively humidity	＜95%（no condensation at 25C）
	atm press	86~106kPa
	power supply	AC，220V±10%/50Hz
	10W-30W	482mmx395mmx132mm
	50W-100W	482mmx222mmx564mm

Optical Signal Parameters

Item	Unit	Technical Specs
Optical wavelength	nm	1100-1600
nominal optical input power	dBm	-1
Input optical power range	dBm	-15~+2
Max input optical power	dBm	+3
Optical interface		FC/APC
optical reflection loss	dB	45³

FMUSER has upgraded panel design of all CZE series to FU series, stay tuned for further updates!

Price(USD)	Qty(PCS)	Shipping(USD)	Total(USD)	Shipping Method	Payment
8500	1	0	8500	DHL
				DHL

Previous:FUTV-9451 Outdoor (100Watt) UHF MUDS Broadband DVB-T DTMB Digital HD SD mpeg2 TV Transmitter Television Numerique Terrestre TNT gap filler amplifier

Next:FMUSER FUTV-9422 (500Watt) UHF MUDS Broadband HD SD MPEG2 4 H.264 DVB-T TV broadcast Transmitter SFN ISDVB-T solid amplifier

Leave a message

Message List

Comments Loading...

Products Category

Products Tags

Fmuser Sites

Detail

FMUSER has upgraded panel design of all CZE series to FU series, stay tuned for further updates!

FUTV-9451 indoor (100Watt) UHF MUDS Broadband HD SD MPEG2 4 H.264 DVB-T DVB-C DTMB TV broadcast Transmitter MFN 10w amplifier

FMUSER has upgraded panel design of all CZE series to FU series, stay tuned for further updates!

Leave a message

Message List