FMUSER has upgraded panel design of all CZE series to FU series, stay tuned for further updates! 

FMUSR FU-30C FMT-30L 30W FM Radio Broadcasting Transmitter for Community Country radio station 8km reference

+ 1/2 Wave Dipole Antenna+8 meter RG58 Cable

1/2 Wave Dipole Antenna 8 meter RG58 Cable

Description:

FU-30C 30w FM transmitter is an economical solid-state wide band FM Broadcast Transmitter and Exciter. The device operates in 87.5-108MHz(the standard FM broadcast band), 100KHz frequency step, RF output power can adjust from 0 to 30W continuously, power stepping of which is 0.1w.This device can automatically broadcast with Automatic Broadcasting Control Software.

Feature:

*User-friendly front panel digital, coding switch directly control.
*Integrated LCD screen can show all system parameters: frequency of the transmitter,stereo and mono, volume, power amplifier tube temperature, the audio signal UV table, forward power, reflected power.
*1U standard 19-inch all-aluminum rugged chassis,and has excellent heat dissipation.
*Accurate PLL frequency generating system to ensure frequency will not drift in 10 years, it has a built-in stereo encoder.
*Excellent balance of power AGC control system, the power output is adjustable from 0-30 watts power with automatic gain control, the output power to maintain the set range without drift.
*Signal input can support RCA , also can input SCA signal and RDS signal by using the BNC’s connector AUX .
*RF amplifier uses Freescale MOS transistors MRF1535N partly.
*It Adds a function of automatically setting antenna frequency , so users do not need to debug the transmitter antenna.
*Set the transmitter’s PC-LINK to ON, use our free automatic Broadcast Control software, then it can automatically broadcast and control program.

Technical Specification:

*Frequency: 87.5-108MHz, 70-110MHz,can be customized according to the user
*Frequency Step value: 100KHz, 5KHz.can be customized according to user
*Modulation: FM, peak deviation +/- 75KHz
*Frequency stability: <+/-100Hz
*Frequency stabilization mode: PLL PLL frequency synthesizer
*RF output power: 0-30 watts +/- 0.5dB
*Harmonic suppression: <-65dBc
*RF output impedance: 50Ohm
*RF output connector: L16 (N-type female)
*Audio Input Connector: XLR Female
*SCA and RDS input connectors: BNC female
*Pre-emphasis: 50us, 75us (user selectable)
*S/N ratio of mono:>70 dB (20 to 20KHz)
*S/N ratio Stereo:> 65 db (20 to 15KHz)
*Stereo separation:-50dB
*Audio Frequency Response: 80-15000Hz
*Audio Distortion: <0.5%
*Modulation: 15%
*Input Level:-15dBV
*Supply voltage range: 90V-260V
*Operating temperature range: -20 to 45 celsuis degrees
*Working mode: continuous work
*Dimensions: 483 x 44x 200 mm (excluding handle part), standard rack 19 inches 1U.
*Reference range: 5Km-8Km
*Standard accessories: 1*host, 1* power line, 1* Manual.
*Weight: 3.5 Kg

Package Include:

1* 30W FM Transmitter

1* DP100 1/2 Wave Dipole Antenna

1* 8 meter RG58 Cable(with connectors)

FMUSER has upgraded panel design of all CZE series to FU series, stay tuned for further updates!