Add Favorite Set Homepage
Position:Home >> News

Products Category

Products Tags

Fmuser Sites

Grace m905 Firmware Update

Date:2020/3/4 16:09:58 Hits:




Grace Design has released version 1.10 firmware for the m905 stereo monitor controller. The new version adds a number of useful features:

DSD 64x (2.8224 MHz) via DoP v1.1 (DSD over PCM frames) is now supported in the m905. DSD audio can be sourced from the AES3, S/PDIF or USB digital inputs.
Speaker volume levels can now be displayed in absolute or as custom, user defined levels
The headphone amp source can now be configured to follow the input monitor source or the cue signals (post talkback summing). This allows the m905 headphone amplifier to be used as a headphone monitoring system for talent in the studio, if desired.
The m905 now supports AES dual-wire mode for users with legacy interfaces/converter products that were configured as dual-wire AES for 192kHz sample rates.
The m905 now provides the ability to transfer up to 10 channels of digital audio (eight channels of ADAT and two of AES3, or S/PDIF or TOSLINK) over USB to a computer.
The external mic input and dedicated output on the m905 can now be configured as a standalone preamp. This is essentially an m802 class preamp we’re talking about here!

Leave a message 

Name *
Email *
Phone
Address
Code See the verification code? Click refresh!
Message
 

Message List

Comments Loading...
Home| About Us| Products| News| Download| Support| Feedback| Contact Us| Service
FMUSER FM/TV Broadcast One-Stop Supplier
  Contact Us