JK Audio AutoHybrid

Auto Answer HybridBSW PART: AUTOHYBRID

JK Audio AutoHybridJK Audio AutoHybridJK Audio AutoHybridJK Audio AutoHybrid

JK Audio's AutoHybrid gives you simultaneous send and receive audio through analog telephone lines. Not just another half duplex auto-coupler, this is a full duplex AutoHybrid.

Yes, you can send and receive audio at the same time! The dual transformer hybrid is capable of 20 dB nominal trans-hybrid loss. In other words, your transmit signal will appear mixed with the receive signal, but at a level 20 dB lower than it was sent into the phone line.

This is a simple, passive, auto-answer/disconnect telephone line interface. While this may be JK Audio's smallest hybrid, it contains all the features you need for many simple applications. AutoHybrid is perfect for monitoring remote locations, IFB feeds, and many simple studio, conferencing, and PA telephone interface applications.

The “Auto” feature is very simple. When the Auto switch is selected, AutoHybrid will answer on the first ring. The phone line will remain off-hook, until either the Drop button is depressed, or until the phone company releases the line. Keep in mind that some business PBX telephone systems do not provide this release signal.

This small desktop unit easily converts to a rackmount unit using the optional RA4 rack panel. The RA4 holds four AutoHybrids in a 1U rack space.

Main Features:

*Passive operation - draws power from the phone line

*Full duplex hybrid

*XLR send jack

*XLR receive jack

*Auto-answer / Disconnect vHybrid null adjust - up to 20 dB separation

*Front panel Off-Hook LED

*Detachable remote screw terminal block provides: Off-hook control, Release control & OH LED signal

Leave a message 

Message List