How To Flash Firmware on Android TV Box using PhoenixCard Tool

Date:2020/2/25 11:26:55 Hits:

In this tutorial, I will teach you how to flash firmware on Android TV Box using Phoenixcard tool. The steps involves is easy and straight forward even if you’re computer illiterate, don’t worry just try to get Phoenixcard Tool. If you’re just hearing Phoenixcard Tool for the first time, you can read more from previous tutorial here.

One of the great features while most of the people want to upgrade the TV Box is that, To devoid policy restrictions in order to add more features. This can enable the user to upgrade the Android TV Box and as well as flash firmware. The best way to do this is to flash the TV Box using the Phoenixcard flash tool.

Before proceeding to burning the SD Card or Flashing firmware, then you need to have the following requirements

Pre-Requisites
A good working condition laptop or PC
Android TV Box running AllWinner Chips
Download and Install Phoenixcard Tool on your laptop or PC
Download the ROM/Firmware according the Android TV Box chipset, you can download from here
An empty MicroSD card or SD card
An External Card Reader

A toothpick

Guides To Flash Firmware On Android TV Box Using PhoenixCard Tool

1. Download the and prepare the firmware (Extract it to filename.img file, if the downloaded file is img format, then no need to extract it again.

2. Connect MicroSD Card or SD Card to your PC or Laptop

3. Launch the downloaded burning tool extracted file, Locate and run PhoenixCard.exe, the computer system will automatically identify the inserted SD Card (Note that you need remove all the external storage connected to system except SD Card to use) , An interface will appear like shown below

4. Tap on the image file button, locate and select the firmware you want to burn (filename.img downloaded from the official source)

5. Tap to burn (Note that this process will automatically format the SD card before burning, If there’s any other important data in the SD card need to be backup first), After the system prompts finish writing, then click on “Exit” and remove the SD Card.

Products Category

Products Tags

Fmuser Sites

How To Flash Firmware on Android TV Box using PhoenixCard Tool

Leave a message

Message List