Add Favorite Set Homepage
Position:Home >> News

Products Category

Products Tags

Fmuser Sites

Apogee Symphony MkII 8X8S2-A8MP-PTHD

Date:2020/2/10 20:53:37 Hits:



PTHD Chassis with 8x8 Analog I/O, 8x8 AES/OP I/O, 8 Mic Pre Amp Module (Both slots)BSW PART: 8X8S2-A8MP-PTHD

Symphony I/O Mk II HD is designed for the Pro Tools HD user who needs a multi-channel audio interface with the best sound quality at an incredible cost per channel value. Whether using a Mac or PC based studio, Symphony I/O Mk II HD can connect directly to your Pro Tools HDX, Pro Tools HD Native or Pro Tools Core/Accel systems. Symphony I/O Mk II HD can be utilized alongside or in place of Avid? or Digidesign? interfaces for Pro Tools HD. In fact, each I/O module installed in Symphony I/O Mk II HD appears and functions in Pro Tools HD the same if it were a separate Avid HD I/O interface, so set up is easy and you can take advantage of important Pro Tools features such as sample-accurate delay compensation. A single Symphony I/O Mk II HD unit can have up to 32 simultaneous analog I/O, so you can have more channels with less rack gear. Need even more channels? You can utilize multiple units simultaneously, with one Symphony I/O Mk II HD per every Pro Tools HD port in your system. Calibrating your I/O is easy with Symphony I/O Mk II HD’s front panel touchscreen.


Main Features:


* Best performance of any multi-channel Pro Tools HD interface
* Best cost per channel value of any Pro Tools HD interface solution
* Connects directly to any Pro Tools HD system (Mac or PC)
* Emulates Avid HD I/O interface, including sample-accurate delay compensation
* Connect multiple units in a single system (1 unit per HD port)
* Easy I/O calibration with front panel touchscreen


Specifications:

INPUTS:


Analog Inputs:
* 8 built-in mic preamps
* Digitally controlled, 85dB microphone preamps
* 4 Hi-Z 1/4” instrument inputs capable of handling high level instruments
* Selectable 48v phantom power, Soft Limit and phase invert
* 8 balanced inputs on 1 DSUB 25-pin connector

Inserts:
* 8 balanced software assignable analog insert points
* Return 1-8 on 1 DSUB 25-pin connector

Digital Inputs:
* AES-EBU IN: 8 inputs on 1 DSUB 25-pin connector

Optical IN: Supports ADAT, SMUX & S/PDIF:

* ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector
* SMUX: 8 channels 88.2-96 kHz on 2 Toslink connectors
* S/PDIF: 2 channels, up to 96 kHz on 1 Toslink connector
* Coax IN: 2 channels of S/PDIF, up to 192 kHz on 1 RCA connector


OUTPUTS:

Analog Outputs:
* 8 balanced outputs on 1 DSUB 25-pin connector

Inserts:
* 8 balanced software assignable analog insert points
* Send 1-8 on 1 DSUB 25-pin connector

Digital Outputs:
* AES-EBU OUT: 8 outputs on 1 DSUB 25-pin connector

Optical OUT: Supports ADAT, SMUX & S/PDIF:
 * ADAT: 8 channels 44.1-48 kHz on 1 Toslink connector
 * SMUX: 8 channels 88.2-96 kHz on 2 Toslink connectors
 * S/PDIF: 2 channels, up to 96 kHz on 1 Toslink connector
* Coax OUT: 2 channels of S/PDIF, up to 192 kHz on 1 RCA connector

Analog to Digital:
* THD+N: -115dB @ 22dBu (0.00020%) unweighted
* Dynamic range: 122dB A weighted
* Maximum input levels: +4dB setting: +24dBu, -10dB setting: +6dBV
* Frequency response at 44.1kHz: 1-20,000 Hz (+/- 0.05dB)
* Input impedance: 10K

Digital to Analog:
* THD+N: -119dB @ 21dBu (0.00014%) unweighted
* Dynamic Range: 126dB A weighted
* Max output levels – ∞ to +24dBu
* Frequency response at 44.1 kHz: dc to 20kHz (+/- 0.05dB)
* Output impedance: 25 Ohm
* Outputs are balanced through Apogee’s proprietary Perfect Symmetry Circuitry (PSC)

Headphone Output:
* 1 stereo 1/4″ headphone output on front panel
* THD+N: -110dB @19dBu into 600 Ohm (=80mW), -101dB @14dBu into 32 Ohm (=470mW)
* Dynamic Range: 121db A weighted
* Output: Apogee’s proprietary Constant Current Drive* provides smooth frequency response with any headphones
* Power: 90-240VAC, 50-60Hz, 150W

Operating System:
* Thunderbolt: Mac OS only 10.9.5 and above
* HD: Any Mac or PC running Pro Tools HD 9 or greater

Software Compatibility:
* Thunderbolt: Logic Pro or any Core Audio compatible application on Mac OS X
* HD: Pro Tools HD 9 or greater

Package Contents:
* Symphony I/O Mk II Interface
* Power Cable
* Quick Start Guide
* Warranty Booklet

Symphony I/O Mk II Dimensions:
* Inches: 17.75 (19 with Rack Ears) x 11.5 x 3.5
* Centimeters: 45 (48.26 with Rack Ears) x 29.2 x 8.9

Packaging Dimensions:
 Symphony I/O Chassis Box:
 * Inches: 22.875 x 17.75 x 9.25
 * Centimeters: 58.1 x 45.1 x 23.5

 I/O Module Box:
 * Inches: 13.75 x 12.25 x 3.25
 * Centimeters: 34.9 x 31.1 x 8.3

Leave a message 

Name *
Email *
Phone
Address
Code See the verification code? Click refresh!
Message
 

Message List

Comments Loading...
Home| About Us| Products| News| Download| Support| Feedback| Contact Us| Service
FMUSER FM/TV Broadcast One-Stop Supplier
  Contact Us