CircuitWerkes SITESENTRY2

Web Based 2 Channel Remote Monitor & ControllerBSW PART: SITESENTRY2

The CircuitWerkes SiteSentry2 features an internal Web server that lets you monitor your site from any Web browser in the world. It automatically detects both meter low and meter overload conditions on one or both channels. Its internal temperature sensor can respond to high or low temperature conditions, while its external audio monitor meters two channels of audio and can respond if either silence or overload is detected. Click here to get a quote.

The SiteSentry2 gives you Web control of six relays (two are DPDT) that can be latching or momentary. Two status inputs give a visual indication, via the Webserver, whenever grounded and can also trigger automated relay actions. Use the SiteSentry2 wherever you need an inexpensive, network-addressable controller with status capabilities. Three levels of user control are available ranging from reader up to administrator.

When meter-low, overload, or external status change is detected, the SiteSentry2 can perform user-programmed, automated sequences of actions and can also respond to user control via the network or via external contact closure inputs. Actions can be programmed to run once or to repeat while the condition exists. Alternate actions (or cancellation of previous actions) can be set to run when the audio returns to normal.

Up to two SiteSentry2s can be optionally rack mounted in a single sized rack shelf. Administrators can perform all setup through the Web server.

The SiteSentry2 includes free multi-site monitoring software. User settings and labels can be saved to the host computer and uploaded to the original SiteSentry2 or to others for mass programming.

CircuitWerkes SiteSentry2 Features:

* Internal Web Server lets you monitor your site from anywhere in the world

* Channel monitoring via meters and digital readout of values

* Onboard dual input audio monitor can detect silence or overload on stereo or mono systems

* Web interface knows when it has lost communications with the site and alerts you and tries to reconnect automatically

* Has an on-board temperature sensor

* 18 user-definable alarm conditions can trigger up to 3 actions per alarm

* Two external status inputs can activate user-defined actions; inputs are optocoupled and triggered by grounding or by supplying a voltage (user configured)

* Six independent relay outputs (4 SPST and 2 DPDT), controlled by action sequences or by user command

* Relays can be momentary or latching

* DHCP or Static IP capable

* Free Multi-Site monitoring software included

* Free software has integrated logging capability & SMS / e-mail alerting for alarm conditions

* All configuration data can be stored locally on a PC for re-use later

Leave a message 

Message List