Add Favorite Set Homepage
Position:Home >> News

Products Category

Products Tags

Fmuser Sites

Telos Hx2 Dual Digital Hybrid Analog and AES In-Out

Date:2020/1/16 9:17:37 Hits:



Dual Digital Hybrid w/AES (2001-00288)BSW PART: HX2-AES

Telos Hx2HX2-AESTelos Hx2
The Telos Hx2 represents the highest state-of-the-art in hybrid performance, with Telos processing technologies that take the POTS hybrid to a new level of consistently superior performance, regardless of telephone line characteristics.

Inside the dual-hybrid Hx2, you'll find advanced hybrid technology with new features that significantly sweeten and control caller audio. It comes standard with Auto-Answer, caller disconnect detection, sophisticated new audio-leveling and anti-feedback routines for enhanced open-speaker applications, call screening and line-hold features, front-panel send and receive audio metering, plus much more. This version offers AES3 I/O.



Telos Hx2-AES Features:


* Advanced hybrid algorithms
* New symmetrical wide-range AGC and noise gate by Omnia, with adjustable gain settings
* Studio adaption and pitch shifter help prevent feedback in situations where open speakers are required
* Adjustable caller override improves performance and allows you to individualize the degree to which the announcer ducks the caller audio
* Digital Dynamic EQ and adjustable smart leveler keeps audio spectrally consistent from call to call
* New EQ High and EQ Low display meters for each hybrid
* Separate Send level and Receive level meters for each hybrid
* Status Symbols make life easier for producers and talent with their animated high-contrast icon display of line status
* Place caller on-hold via front panel button
* Auto-Answer with selectable ring count
* Worldwide disconnect signal detection. (loop drop, dial tone, or re-order tone)
* Input/output via analog XLR and digital AES3
* Input switchable between MIC or LINE levels
* All Telos products include a 5 year warranty


Specifications for HX1 and HX2


Processing Functions
General: 
Telos 3rd-generation Adaptive Digital Hybrids
Telos Exclusive Feedback Reduction Functions, including Acoustic Echo Cancellation
Send (to caller
Processing: 
Sample Rate Conversion
High-pass Filter
Frequency Shifter
AGC/Limiter
Receive (from caller) Processing: 
High-pass 'Hum' Filter
Smart AGC / Platform Leveler
Noise Gate
Caller Ducking
Telos' DDEQ (Digital Dynamic Equalization) 3-band Adaptive Spectral Processor
Sample Rate Conversion


Analog Inputs


Send Analog Inputs: 
(1) Hx1
(2) Hx2
Connector: XLR Female, Pin 2 High (Active Balanced with RF Protection)
Input Range: Select between MIC and LINE levels
Input Level: Adjustable from -10 to +4 dBu (nominal)
Impedance: Bridging, > 50K Ohms
Analog Clip Point: +21 dBu
Analog-to-Digital Converter Resolution: 20 bits


Analog Outputs


Receive Analog Outputs: 
(1) Hx1
(2) Hx2
Connector: XLR Male, Pin 3 High
Output Level: Nominal at +4 dBu
Impedance: <50 ohms
Digital-to-Analog Converter Resolution: 24 bits
Headroom Before Clipping: 20 dB headroom from 4dBU nominal levels


AES Digital Input / Output (Optional)


Overview: Plug-in module converts the XLR inputs and outputs to AES3.
Rate Conversion: Sample Rate Converters on all inputs and outputs. Inputs can accept 32, 44.1, and 48kHz rates. Clock for outputs may be sourced from the AES inputs or internally-generated 48 KHz.
Input Level: Nominal at -20 dBFs
Output Level: Nominal at -20 dBFs


Audio Performance


Frequency Response: 200 to 3400 Hz, +/- 1 dB
THD+N/Input: < 0.5% THD+N using 1 KHz sinewave
Signal to Noise: >90 dB


Control Ports


General purpose Input/Output: Single 9 pin D-Sub connector with 2 status outputs (Ringing and ON-AIR) and 2 control inputs (ON and OFF) per hybrid

Leave a message 

Name *
Email *
Phone
Address
Code See the verification code? Click refresh!
Message
 

Message List

Comments Loading...
Home| About Us| Products| News| Download| Support| Feedback| Contact Us| Service
FMUSER FM/TV Broadcast One-Stop Supplier
  Contact Us