Add Favorite Set Homepage
Position:Home >> News

Products Category

Products Tags

Fmuser Sites

CircuitWerkes DT-232

Date:2020/1/15 16:31:41 Hits:



DTMF To ASCII Bi DirectionalBSW PART: DT-232

The CircuitWerkes DT-232 is a dial-up remote control that gives you DTMF access to four user-programmable relays. Relays can be programmed to respond to any DTMF tone or sequence.
The DT-232 can output serial data, in your user-defined format, so it can interface to virtually any piece of hardware that requires serial control or input. The DT-232 receives DTMF tones from either its audio input connector or from its built-in telephone autocoupler. The DTMF tones are converted to user-defined ASCII data and transmitted to the host computer or remote equipment.

In addition to receiving DTMF tones, the DT- 232 can accept ASCII input from its serial port and generate DTMF tones that are transmitted to a phone line for controlling equipment in remote locations.

An included Windows program makes control and programming incredibly simple. You can also operate the DT-232's basic functions from any terminal program on almost any type of computer. The free software lets you upload, download save your DT-232 configurations. Software is required for the advanced programming functions.



CircuitWerkes DT-232 Features:


* Converts DTMF tones to user defined ASCII strings and sends them out via serial port
* Four on-board SPST relays can be controlled via DTMF tones or sequences
* Accepts DTMF from either its audio input port or the built-in autocoupler
* Auto-answers on user selectable ring number and auto-drops at call's end
* 4-digit user-settable password prevents pirating
* Each relay can be independently set to function as a momentary closure, latching closure with distinct on/off codes, interlocked latching with other relays and more
* Any relay can be assigned to any tone(s)
* Decodes up to 19 user-defined, DTMF, sequences
* Each sequence can have up to 7 actions, including: Close relay, open relay, timed closure/timed open, toggle relay, pause, send ascii and jump to sequence number
* Serial outputs can be up to 32 characters and are completely user-programmable; using action sequences, strings can even be combined
* Accepts serial data input and sends DTMF tones for controlling remote equipment on phone lines
* Windows based user interface for PC users simplifies control and programming and lets you save your DT-232 configurations
* Each relay is programmable to beep (send DTMF tone) when activated
* Provides phone line audio input or output
* Relay outputs appear on easy to use screw terminals
* Retains its settings after a power failure
* Rugged, metal case can be table, wall or, optionally, rack mounted

Leave a message 

Name *
Email *
Phone
Address
Code See the verification code? Click refresh!
Message
 

Message List

Comments Loading...
Home| About Us| Products| News| Download| Support| Feedback| Contact Us| Service
FMUSER FM/TV Broadcast One-Stop Supplier
  Contact Us