Add Favorite Set Homepage
Position:Home >> News

Products Category

Products Tags

Fmuser Sites

Clear-Com HelixNet 2-wire Dual Party-Line Interface Module

Date:2020/1/13 11:24:15 Hits:



HelixNet 2-wire Clear-Com/RTS dual party-line interface module (HLI-2W2)BSW PART: HLI-2W2

HelixNet Main Stations accept both two-wire and four-wire optional interface modules, offering seamless connectivity to virtually all common two-wire and four-wire audio systems.

Designing a seamless interface between analog two-wire and digital systems is no simple feat, yet Clear-Com has done just that. The HLI-2W2 Interface Module enables two-channels of Clear-Com or RTS intercom to transparently interface with digital HelixNet intercom channels. This two-wire module preserves the wideband two-wire frequency response, is conveniently packaged in a rugged, pluggable module, and is easily assignable to any of the HelixNet Main Station intercom channels



Specifications:


Dimensions
* 7.36" x 2.24" x 1.54" (187mm x 57mm x 39mm) Weight
* 16oz (.454kg) Connectors
* Intercom Line: (2) 3-pin XLR–F

Partyline
* Maximum Level Before Clipping: 6dBu
* Nominal Input Level: -18dBu (C-C), -12dBu (RTS)
* Input Impedance: >= 10KΩ bridging
* The following specified for a route to four-wire input at 0dBu in:
* Frequency Response: 100 Hz - 10 kHz ±3dB
* Distortion: <0.2% THD @ 1kHz
* Noise: <-55dBu
* The following specified for a route from a four-wire output at 0dBu out:
* Frequency Response: 40 Hz - 10 kHz ±3dB
* Distortion: <0.2% THD @ 1 kHz
* Noise: <-75dBu
* Auto-nulling and Echo Cancellation
* RTS/Clear-Com Selectable
* Termination: External
* Power: 30V max external

Power Requirements
* 0.025mA/channel
* DC Voltage Range: 20-30 volts

Leave a message 

Name *
Email *
Phone
Address
Code See the verification code? Click refresh!
Message
 

Message List

Comments Loading...
Home| About Us| Products| News| Download| Support| Feedback| Contact Us| Service
FMUSER FM/TV Broadcast One-Stop Supplier
  Contact Us