Please kindly follow the steps and check the frequency issue:

1. Press and hold the power button

2. Connect the power adapter with transmitter, and turn on the power.

3. Release the power button, you'll see H or L on the screen, this is the RF power output of the transmitter, H means 7w, L means 1.5w. Choose the power you need using the "UP" and "DOWN" button on the panel, for example, you chose "H" mode, then press the power button once.

4. Now you are in the page of setting High end of frequency band, default display is 108mhz (because the device's default band is 76-108mhz), use the "UP" and "DOWN" button on the panel to adjust the frequency you want (153.5mhz is the maximum), for example you set to 113mhz, then press the power button once.

5. Now you are in the page of setting Low end of frequency band, default display is 76mhz (because the device's default band is 76-108mhz), use the "UP" and "DOWN" button on the panel to adjust the frequency you want (0mhz is the minimum), for example you set to 70mhz, then press the power button once, all previous setting will be stored after within 3 seconds.

6. Unplug the power adapter, and re-plug again without touching the power button, you are operating the transmitter now at 7 watt from 70-113mhz.

For more information about FU-7C 7W FM transmitte, please click this link: https://www.fmuser.net/content/?502.html

Prev:How to protect outdoor RF antennas from lightning strike?

Next:What's the difference between Analog and Digital Mixer

Leave a message

Message List

Comments Loading...

Products Category

Products Tags

Fmuser Sites

Tips of setting the frequency for FU-7C 7W FM transmitter

Leave a message

Message List