2.R2 1KW/10W
3.R3 1KW/10W (for biggest force in the exit you replace with short-circuit).
4.C1 50pF trimmer
5.C2 30pF trimmer
6.C3 22pF/4KV
7.C4, c6, c9 10nF/1KV
8.C5, c7 1nF/1KV
9.C8 100mF+100mF/450V (Double electrolytic)
10.C9, c10 10nF
11.RFC1, rfc2, rfc3 air Inductors: 15 coils diameter 8mm, from wire 1mm.
12.T1 Transformer 220V/6V-1A
13.T2 Transformer of configuration with being first 4 or 8W
14.T3 Inductor with core ferrite (externally it resembles with small transformer but has a turn only).
15.D1 BY127 rectifier
16.Lamp 807 SYLV USA or EL34 or equivalent
17.ANTENNA Simple dipole L/2. (L= wave length)
18.S1 Main switch of catering.
19.S2 Switch of catering of rise (him we close after zestacej' the thread).

Most elements you can him find in a old back-white television with lamps.

Regulations:

1.With the C2 we regulate the frequency.

2.With the C1 we adapt the resistance of aerial (practically him we regulate so that it is heard our voice in the radio as long as you become cleaner).
Notes:
1.The catering better it does not become at straight line from the network 220V but via transformer 220V/220V of isolation and safety 1A.
2.When does not exist the R3, the force of expense is bigger, but respectively is increased also the hum 50Hz, because the simplicity of designing.
3.The control (Audio In) can become from a kasseto'fwno or other powerful source. If it is microphone it will be supposed precedes amplifier so that it acquires a force of order of 8W roughly.

Prev:How to Build an FM Antenna Out of Coat Hangers

Next:The UnFETtered Crystal Radio

Leave a message

Message List

Comments Loading...

Products Category

Products Tags

Fmuser Sites

Transmitter FM 45W with valve

Leave a message

Message List