- overview, information and tutorial about the basics of the directional coupler and basic directional coupler design

RF directional couplers are often used in RF design applications. Directional couplers are RF passive devices used to couple a specific proportion of the power travelling in one transmission line out through another connection or port. Directional couplers find many applications in RF design , ranging from through line power sensors to transmitter automatic levels controls. As such they are particularly useful, enabling power levels to be sensed without making a direct connection to the transmission line carrying the power.
RF directional couplers can be implemented using a variety of techniques including stripline, coaxial feeder and lumped or discrete elements. They may also be contained within a variety of packages from blocks with RF connectors, or solder pins, or they may be contained on a substrate carrier, or they may be constructed as part of a larger unit containing other functions.

RF directional coupler basics

An RF directional coupler is a four port device. The four ports are generally termed:

-Input (Port 1, Incident)
-Transmitted (Port 2, Output)
-Coupled (Port 3, Forward coupled port)

-Isolated (Port 4, Reverse coupled port)

Terms in brackets refer to alternative names for the ports that may be seen on occasions.

Typically the main line is the one between ports 1 and 2. Normally this may be more suited to carry high power levels and it may have larger RF connectors, if it is a unit with RF connectors. The other ports are normally more suited for lower powers as they are only intended to carry a small proportion of the main line power. Ports 3 and 4 may even have smaller connectors to distinguish them from the main line ports of the RF coupler. Often the isolated port is terminated with an internal or external matched load which would typically be 50 ohms.

RF Directional Coupler

While specific ports are given labels on a device, this is normally more of a physical constraint as some ports will be manufactured to carry higher powers than others. In fact any port can be the input, and this will result in the directly connected port being the transmitted port, the adjacent port being the coupled port, and the diagonal port being the isolated port.

RF directional coupler specifications
As with any component or system, there are several specifications associated with RF directional couplers. The major RF directional coupler specifications are summarised in the table below.

RF directional coupler practical considerations
there are a number of physical considerations that need to be taken into account when choosing and using RF directional couplers.

Prev:Wilkinson Power Divider Splitter Combiner

Next:RF Hybrid Combiner, Splitter and Divider

Leave a message

Message List

Comments Loading...

Products Category

Products Tags

Fmuser Sites

RF directional coupler basics tutorial

RF directional coupler basics tutorial

Leave a message

Message List