Input:IP, Tuner  
Output:DVB-T, DVB-C  
Inner Function:Scrambler  

Outline

FUTV434T IP Mux and modulation module is the latest generation mux-modulating all-in-one device. The modular design of this device makes each of its daughter cards stand-alone when operating. Each daughter card can receive the UDP format TS through GE port, and support up to 256 different input address (IP address and port number). It’s like the all-in-one device combined with 4 multiplexers, (256 channels inputs) and 4 DVB-T modulators, which can output 4 carriers (30M~860M) through the two RF output interfaces. Additionally, 1U chassis supports up to 3 modules (12 channels mux-modulation) while the 4U chassis supports up to 12 modules (48 channels mux-modulation). This FUTV434T IP Mux and modulating module has excellent integrated level, powerful performance and low cost, which is especially adequate for the new generation IP CATV system.

Features

*Dual power supply

*1 GE input, RJ45interface or SFP
*Supports up to 256 channels TS input over UDP/RTP, MPTS or SPTS
*Supports unicast and multicast, supports IGMP v2v3
*Max 840Mbps for all input
*Supports 4 channels multiplexing
*Supports accurate PCR adjusting
*Supports PID filtering, remapping and PSI/SI editing
*Supports up to 180 PIDS remapping per channel
*4 DVB-T carriers output ,compliant to ETSI EN300 744 standard
*RF output frequency range: 30~860Mhz, 1Khz stepping
*RF output level: -16~0dbm (per DVB-T carrier), 0.5db stepping
*Excellent RF performance, MER≥40db
*Support SNMP
*Modular design,1U chassis support 3 modules , 4U chassis support 12 modules

Appearance and Illustration

Front Panel Illustration

   

Specifications

Input	Interface	1GE(RJ45) or 1 SFP input port, hot backup
	Transport Protocol	TS over UDP/RTP, unicast and multicast, IGMP V2/V3
	Transmission Code	Max 840Mbps for all channels
MUX	Input Channel	256
	Output Channel	4
	Max PIDs	180 per channel
	Functions	PID remapping (auto/manually optional)
		PCR accurate adjusting
		PSI/SI table automatically generating
Modulation Parameters	Channel	4
	Modulation Standard	ETSI EN300 744
	Constellation	QPSK/16QAM/64QAM
	Trans mode	2K/4K/8K
	FEC	1/2,2/3,3/4,5/6,7/8
RF Output	Interface	2 F typed output port (per port 2 adjacent carriers)
	RF Range	30~860MHz, 1kHz stepping
	Output Level	-16~0dbm (per DVB-T carrier), 0.5db stepping
	MER	≥ 40dB
	ACLR	-55 dBc
System	Network management software (SNMP) supporting
General	Demission (WxLxH)	630mm*440mm*44.5mm
	Weight	9kg
	Temperature	0~45C(operation),-20~80C(storage)
	Power Supply	AC 100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz
	Consumption	15.4W

NMS Operation

     

   

   

   

   

Principle Chart

   

Order Information

Packing List

FUTV434T IP Mux and modulation module: 1-3 pieces (depend on the purchasir order)

1U chassis: 1 set

Power Cord: 1 piece